It hasn't been easy to find guest blog writers who fit into this blog and are not out for commercial interests. At last, the second person has been found and here's a good article by fellow blogger Nazem Youssef, who completed his IDCS course back in October 2007, which was during my early blogging days!.
You can find his blog here.
Enjoy the article;
5 Tips For Divers With Water In Their Nose
Many divers start off with water in their nose. Under the water even with your nose in the mask water can still find its way in. Many people find difficulty with this at first. Mastering breathing out of your nose at the correct time is key to less water in your nose and a more comfortable dive. These tips will help you get rid of the water.
Proper Fitting Mask
To find the right seal, place the mask on your face with the strap loose and breath in from your nose. It should not allow air to be sucked in and you should be able to pinch your nose to equalize your ears. Keep in mind masks with larger volume will take more air to clear. Look for a low profile mask where the glass is closer to your face.
Water in your mask?
Get in Your Comfort Zone
Practice in shallow water with the mask off, regulator in and your face in the water, under supervision if needed. Position your nose so no water is getting in and start inhaling through your mouth. Exhale through your nose and continue until you are comfortable with water around your nose. As you get more comfortable move around and even put your mask on and clear it. You can do this with full gear or just your snorkeling gear. Clearing water out will become second nature very quickly.
Remember Look Down, Breath Out, and Look Up
These are the basic step in clearing your mask, but it’s amazing to watch them get thrown out the window. When you first feel water in your mask or nose look down as you inhale. This moves the water to the bottom of the mask and as you exhale the water is displaced out. Breath out and then start to move your head up to clear any remaining water.
Loosen Up Your Mask Strap
Contrary to popular belief you don’t need to have your mask strap as tight as you can get it. A proper fitting mask will stay without a strap. Now don’t go taking if off, you still need it to keep your mask on if it gets bumped. You don’t want to deform the mask’s seal by pulling on the glass too much. This is what can cause leaks. Keep it just tight enough to stay on your head. Look for a Velcro mask strap so you don’t have to adjust it all the time.
Don’t Lift The Bottom Of Your Mask
When you blow out of your nose the air displaces the water by having more pressure in the mask than the surrounding water. Put your fingers on the top of the mask on each side and forget about your thumbs. Pushing on the top of the mask relieves enough pressure to allow the water to be pushed out.
While there are many different ways to clear your mask, you can use these tips to guide you in the right direction. Dive in and don’t be discouraged by a little water in your nose.
Written by: Nazem Youssef